How to Strip Wallpaper

As the dark nights draw in, there is still some time to redecorate your house before the clocks change and winter officially begins. Maybe you feel the wallpaper in the lounge is looking a little tired.

Perhaps the spare room could be brightened up and transformed in to a study. You could have decided on a new colour scheme for the house. Regardless of your objectives, removing wallpaper needn’t be stressful. We’ve put together a number of tips to help make the process as painless as possible, so you can be applying some lovely fresh paint in no time, and enjoying your new look during the winter season.

Preparation

As always, preparation is key. Before you think about the tools you’re going to need to do the job, or even look at a tin of paint, there are a number of important things to address.

  1. Get some dust sheets and cover any exposed areas. Picking up small strips of wallpaper from your carpet is never fun!
  2. Cut the power. It’s advisable to cut the power, and protect all electrical sockets with masking tape.
  3. Work out what kind of wall you have – plaster or drywall. Drywall, as the name suggests, needs to be kept dry, so go easy on any detergent, water or steam treatment you may decide to use. To tell if you have drywall as opposed to plaster, simply tap the wall. If it sounds hollow, it’s probably drywall – time to proceed with caution. Drywall consists of the commonly-used mineral gypsum, whereas plaster consists of sand, cement, lime and water – resulting in a much denser, colder finish.
  4. Work out what kind of wallpaper you have. Some, more modern wallpaper can be easily peeled off by hand. Simply loosen a strip, and if it comes off easily by hand you’re in business! Hey presto! If, however, you have dry walls, you still need to be careful. Use a putty knife to carefully loosen the paper and slowly peel it back; if you tear it straight off you risk damaging the drywall.
  5. More traditional, non-strippable wallpaper will require a vigorous approach – soaking and scraping or steaming.

Soak and Scrape

One way to remove wallpaper is to use a ready-mixed solvent, or hot water and fabric softener. Either will work well. Firstly, it’s a good idea to score the wallpaper, to ensure the solution or water is absorbed properly.

To apply the solution, using a painter roller can be an effective method. Once the paper has been suitably dampened, simply use a scraper to remove it. It should come off easily.

If you don’t fancy using a paint roller, a large spray bottle will suffice, but it may not penetrate the paper in the same way.

Steam Treatment

For drywalls, steam treatments can be highly effective, as the paper slides off very easily, and quickly. It reduces the need to scrape your drywall and risk damaging it (and having to spend more money on repairing it).

Wallpaper strippers are inexpensive to hire and can be ready to use in 15 minutes – simply fill the water tank and wait for it to heat up. Once it’s up and running you’ll fly through the paper in no time! Happy steaming!

Cleaning

One thing that gets commonly overlooked is the need to clean the walls thoroughly after the paper has been removed. Again, don’t scrub – keep it gentle. A bucket containing a mixture of washing up liquid and warm water should suffice, applied with a large sponge. Once the residual pieces of paper have been removed, simply rub down with a towel. You should be left with a smooth, dry finish – ready for that paint to be applied!

 


Back to articles

About the Author

Laura Harris

Laura works in our Ecommerce Team, with 6 years of experience at HSS. Speaking to customers on a daily basis, she brings a wealth of product knowledge and is able to give her advice on the right tool for the job no matter how big or small.


You may also like

Leave a Reply

Please note. Your email address will not be published. Required fields are marked *