Boost Pumps
Cold Water Boost System
Cold Water Boost System
£POA
Boost Pumps are available in a range of formats including inverter driven, twin head, and high pressure. No matter what the pipework run these units can be utilised when the integral pumps of our chiller and boiler units are not up to specification. These pumps are skid mounted in their own steel frames and are all designed for outdoor use.
View full detailsUseful information
Boost Pumps are available in a range of formats including inverter driven, twin head, and high pressure. No matter what the pipework run these units can be utilised when the integral pumps of our chiller and boiler units are not up to specification. These pumps are skid mounted in their own steel frames and are all designed for outdoor use.
| Duty Head/Flow |
| 4.2bar/4.6L/s |
| Configuration |
| Duty/Assist/Standby |
| Number of Pumps/Inverters/Transducers |
| 37683 |
| Flow Rate per Pump |
| 2.3L/s |
| % of Total Flow |
| 0.5 |
| Max Generated Head |
| Inlet/Discharge Size |
| 2 Storz |
| Flange Rating |
| PN16 |
| Max Rated System Pressure |
| 10bar |
| Pressure Vessel Size |
| 2 x 20L |
| Power Supply |
| 32A 400v 3ph 50Hz |
| Rated Power (per motor) |
| 2.2kw |
| FLC (per motor) |
| FLC (per set) (pumps running) |
| 14.7A |
| Drive Type |
| Inverter Driver |
| IP Rating |
| 54 |
| Dimensions (W x L x H) |
| 3690 x 1690 x 1885mm |
Boost Pumps are available in a range of formats including inverter driven, twin head, and high pressure. No matter what the pipework run these units can be utilised when the integral pumps of our chiller and boiler units are not up to specification. These pumps are skid mounted in their own steel frames and are all designed for outdoor use.
| Duty Head/Flow |
| 4.2bar/4.6L/s |
| Configuration |
| Duty/Assist/Standby |
| Number of Pumps/Inverters/Transducers |
| 37683 |
| Flow Rate per Pump |
| 2.3L/s |
| % of Total Flow |
| 0.5 |
| Max Generated Head |
| Inlet/Discharge Size |
| 2 Storz |
| Flange Rating |
| PN16 |
| Max Rated System Pressure |
| 10bar |
| Pressure Vessel Size |
| 2 x 20L |
| Power Supply |
| 32A 400v 3ph 50Hz |
| Rated Power (per motor) |
| 2.2kw |
| FLC (per motor) |
| FLC (per set) (pumps running) |
| 14.7A |
| Drive Type |
| Inverter Driver |
| IP Rating |
| 54 |
| Dimensions (W x L x H) |
| 3690 x 1690 x 1885mm |
£POA
£POA
Please select a later end date to proceed
PLEASE NOTE: the special offer on this product is not valid for the hire period you have selected. The price in your basket will reflect this.
Boost Pumps are available in a range of formats including inverter driven, twin head, and high pressure. No matter what the pipework run these units can be utilised when the integral pumps of our chiller and boiler units are not up to specification. These pumps are skid mounted in their own steel frames and are all designed for outdoor use.
| Duty Head/Flow |
| 4.2bar/4.6L/s |
| Configuration |
| Duty/Assist/Standby |
| Number of Pumps/Inverters/Transducers |
| 37683 |
| Flow Rate per Pump |
| 2.3L/s |
| % of Total Flow |
| 0.5 |
| Max Generated Head |
| Inlet/Discharge Size |
| 2 Storz |
| Flange Rating |
| PN16 |
| Max Rated System Pressure |
| 10bar |
| Pressure Vessel Size |
| 2 x 20L |
| Power Supply |
| 32A 400v 3ph 50Hz |
| Rated Power (per motor) |
| 2.2kw |
| FLC (per motor) |
| FLC (per set) (pumps running) |
| 14.7A |
| Drive Type |
| Inverter Driver |
| IP Rating |
| 54 |
| Dimensions (W x L x H) |
| 3690 x 1690 x 1885mm |
Boost Pumps are available in a range of formats including inverter driven, twin head, and high pressure. No matter what the pipework run these units can be utilised when the integral pumps of our chiller and boiler units are not up to specification. These pumps are skid mounted in their own steel frames and are all designed for outdoor use.
| Duty Head/Flow |
| 4.2bar/4.6L/s |
| Configuration |
| Duty/Assist/Standby |
| Number of Pumps/Inverters/Transducers |
| 37683 |
| Flow Rate per Pump |
| 2.3L/s |
| % of Total Flow |
| 0.5 |
| Max Generated Head |
| Inlet/Discharge Size |
| 2 Storz |
| Flange Rating |
| PN16 |
| Max Rated System Pressure |
| 10bar |
| Pressure Vessel Size |
| 2 x 20L |
| Power Supply |
| 32A 400v 3ph 50Hz |
| Rated Power (per motor) |
| 2.2kw |
| FLC (per motor) |
| FLC (per set) (pumps running) |
| 14.7A |
| Drive Type |
| Inverter Driver |
| IP Rating |
| 54 |
| Dimensions (W x L x H) |
| 3690 x 1690 x 1885mm |
