
Crosscut and Mitre Saw
Crosscut and Mitre Chop Saw - 110V
For jobs that involve cutting a lot of accurate bevels and mitres, whether you are a shopfitter, kitchen-fitter, carpenter or joiner, this versatile saw-bench is just the job.
We recommend using with a Dust Extractor Vacuum (52538)
Remember to exercise caution when working around dust always using recommended PPE - View our dedicated Health & Safety article on our blog now!
View full detailsUseful information
You must wear all round protection grade 1 goggles to EN 166.B – for less hazardous work grade 2 spectacles can be worn.
General purpose, disposable masks for protection against low-risk dust and water-based airborne sprays.
Protection required against high noise levels. Earplugs are suitable for short-term work.
This tool can be used intermittently for up to 8 hours before reaching vibration Exposure Limit Value.
Gauntlets, PVC, cotton or rigger gloves are required with this item for hand protection.
We recommend using a Dust Extractor where you see this symbol.
Residual Current Devices protect from electric shock. Strongly recommended for electrical equipment used outdoors or in damp conditions.
You will need a vehicle at least the size of an estate car to collect this item