Product highlights

The Vibration Damped Breaker is an easy to use versatile breaker that has up to 50% less vibration than conventional models in its range, this helps with reducing user fatigue and enabling usage times and productivity to be considerably increased.

Remember to exercise caution when working around dust always using recommended PPE - View our dedicated Health & Safety article on our blog now!

£25.20

£10.50

£29.40

£42.00

Prices exclude VAT

Product highlights

The Vibration Damped Breaker is an easy to use versatile breaker that has up to 50% less vibration than conventional models in its range, this helps with reducing user fatigue and enabling usage times and productivity to be considerably increased.

Remember to exercise caution when working around dust always using recommended PPE - View our dedicated Health & Safety article on our blog now!

  • Product details

  • The Vibration Damped Breaker is an easy to use versatile breaker that has up to 50% less vibration than conventional models in its range, this helps with reducing user fatigue and enabling usage times and productivity to be considerably increased.

    Remember to exercise caution when working around dust always using recommended PPE - View our dedicated Health & Safety article on our blog now!



    • Breaking depth 125mm

    • Chisels up to 1.3m3 of masonry per minute
    • Light and easy to operate
    • Lowest vibration value in its class as low as 6.5m/s2 due to built in Active Vibration Reduction sub chassis
    • Symmetrical shape with new grip design for perfect handling
    • Connection end – HEX (TE-S)
    • Take care chisel blades are sharp. Ask HSS for extra chisels if working on a large area
    • Note - Additional chisel and points sharpening costs may apply
    • For technical information on our range of Hilti products call 0844 815 6322

      The TE1000 can be used to break concrete, masonry and floors of all kinds when working at floor level, or below waist level. It can also be used to remove tiles with the chisel attachment.

  • Specifications

  • Voltage:
    110V
    Power:
    1600W
    Single Impact:
    22J
    Hammering Frequency:
    1950 impacts per minute
    Weight:
    12.5kg
    Active Vibration Reduction:
    Yes
    Reduced Impact Energy:
    Yes
  • Reviews

  • Safety information & instructions

  • Some important details that you may need to consider:

    • You must wear all round protection grade 1 goggles to EN 166.B – for less hazardous work grade 2 spectacles can be worn.

    • General purpose, disposable masks for protection against low-risk dust and water-based airborne sprays.

    • Protection required against high noise levels. Earplugs are suitable for short-term work.

    • You are required to wear safety footwear to BS EN 345 for toe protection with this item.

    • Gauntlets, PVC, cotton or rigger gloves are required with this item for hand protection.

    • Residual Current Devices protect from electric shock. Strongly recommended for electrical equipment used outdoors or in damp conditions.

    • You will need a vehicle at least the size of an estate car to collect this item

    • Medium vibration risk - for tools that may be used for up to 2 hours before reaching vibration Exposure Limit Value (ELV).

    • We recommend using a Dust Extractor where you see this symbol.

    Safety information & instructions

    You can download the safety information and instruction manual for this item here:

Have You Considered?

£25.20

£10.50

£29.40

£42.00

Prices exclude VAT