DX5 Rapid Cartridge Hammer

This tool is used for fast and repetitive fixing into hard materials like steel, concrete, and sandstone, making it ideal for construction, engineering, and insulation work.

It uses small powder cartridges to drive nails or fasteners directly into tough surfaces with precision and power—no drilling or plugs needed.

While it’s primarily a professional-grade tool, experienced DIY users can use it safely with proper precautions and protective gear.

It offers speed, consistency, and power for repetitive fixings, saving time compared to manual nailing or drilling methods.

It’s designed for hard materials like concrete, steel, and sandstone. It shouldn’t be used on softer surfaces like plasterboard or wood.

The DX5 features a “contact-only” firing system, meaning it only fires when pressed firmly against the surface—greatly reducing accidental discharges.

It works with magazine-loaded nails ranging from 12mm to 72mm in length, allowing flexibility for different fixing needs.

Yes, the tool uses Hilti powder cartridges, which are available for purchase separately. Always use compatible cartridges for best performance.

Yes, the magazine design allows for quick reloading of both nails and cartridges, keeping downtime to a minimum on busy projects.

Yes, it has adjustable firing power, allowing you to tailor the force depending on the material and the nail length you’re using.

It’s great for securing steel tracks, fixing insulation boards, attaching brackets, or fastening materials to concrete or masonry surfaces.

Regular cleaning is recommended, especially after heavy use, to remove powder residue and ensure smooth, safe operation.

Yes, it produces a sharp firing sound similar to a small nail gun, so ear protection should always be worn.

You should wear safety goggles, gloves, and ear protection to guard against flying debris, vibration, and noise.

Yes, a short training session or familiarisation with powder-actuated tools is advised to ensure safe and effective operation.