Torano Worktop 3000 x 600 x 38mm PEFC

The Torano Worktop is made from high-pressure laminate (HPL), which provides a durable, hygienic, and easy-to-clean surface. It is designed to mimic the look of marble while being far more practical and cost-effective.

Yes, edging strips are included with the worktop to allow you to finish any cut edges and maintain a seamless, polished appearance.

Yes, it’s designed with ease of installation in mind, making it suitable for both DIYers and professionals. The laminate is also easy to cut and handle.

A postformed edge means the top layer of laminate is curved over the front edge of the worktop, creating a smooth 6mm radius that is more aesthetically pleasing and easier to clean than a sharp edge.

Yes, it includes a PUR under-edge seal, which helps protect the worktop from moisture, particularly in areas like sink cut-outs or along the underside edge.

Yes, it is PEFC certified, which means the materials are responsibly sourced from sustainably managed forests.

Yes, matching upstands and splashbacks are available to complete the look and provide a consistent finish across your kitchen surfaces.

Yes, the worktop can be cut to size to fit your kitchen layout. Ensure clean, straight cuts and use the included edging strips to finish any exposed edges.

Laminate worktops (like the Torano) are:

• More affordable
• Easier to install and maintain
• More resistant to moisture

Solid wood worktops are:

• Natural and visually rich
• Require regular maintenance (oiling)
• Prone to expanding or shrinking with humidity

Use a soft cloth with warm, soapy water. Avoid harsh abrasives or scouring pads, as these can damage the surface.

Laminate is heat-resistant to a point, but it is not heatproof. You should always use trivets or heat pads under hot pans to prevent damage.

While designed for kitchens, it can also be used in utility rooms or other dry indoor spaces. It is not recommended for use in bathrooms due to prolonged humidity exposure.

Yes, laminate worktops can accommodate sink or hob cut-outs. Just be sure to seal all cut edges properly to protect from water ingress.

Store it flat and in a dry environment. Avoid placing heavy items on top or storing it vertically for extended periods to prevent warping.