- 25% Off
- 25% Off
- 25% Off
- 25% Off
- 25% Off
- 25% Off
- 25% Off
- 25% Off
Please note: Images are for illustration purposes only. Actual product supplied may differ.
Product name: Floor Sander 240V
Product code: 05412
If you are looking to give old wood floorboards, block wooden floors or traditional parquet a new lease of life then take a look at our heavy-duty Floor Sander to help get the job done with ease. The drum floor sander removes old finishes and most decorative stains, and levels imperfections ready for polishing or varnishing. Whilst the heavy-duty high-speed motor prevents the floor sander from stalling or slowing down when using coarse grit floor sheets.
In order to sand right up to the skirting board we recommend you hire the Floor Edging Sander alongside the Floor Sander. The edging sander allows you to tackle tricky to reach edges, making the job a lot quicker and easier than doing it by hand, and will leave you with a professional finish. See our Hire Pack to make a saving.
Read the HSS Guide to Floor Sanding for some great hints and tips and watch the video below.
Note: Must only be used with a disposable dust bag (available to add to your order at checkout) - an efficient and convenient way of collecting dust. Remember to exercise caution when working around dust and always use recommended PPE - View our dedicated Health & Safety article on our blog now!
- Easily sands board, block and traditional parquet wooden floors
- Efficient 200mm (8in) wide sanding drum
- High-powered vacuum system
- High impact resistant guards
- Tough clamp bar style drum
- Breaks down into three components making it easier to transport
- Sanding sheets and dust bags not included and sold separately at checkout
- Recommended for use with Floor Edging Sander (see our Hire Pack - 05429)
- Brand: Hiretech
- Height: 0.855m
- Voltage: 240V
- Watts: 1920W
- Weight: 42kg
- Width: 0.322m
You must wear all round protection grade 1 goggles to EN 166.B - for less hazardous work grade 2 spectacles can be worn.
Protection required against high noise levels. Earplugs are suitable for short-term work.
Medium vibration risk - for tools that may be used for up to 2 hours before reaching vibration Exposure Limit Value (ELV)
You will need a vehicle at least the size of an estate car to collect this item.
We recommend using a Dust Extractor where you see this symbol
Residual Current Devices protect form electric shock. Strongly recommended for electrical equipment used outdoors or in damp conditions.
General purpose, disposable masks for protection against low-risk dust and water-based airborne sprays.
Floor Sander 240V
If you are looking to give old wood floorboards, block wooden floors or traditional parquet a new lease of life then take a look at our heavy-duty Floor Sander to help get the job done with ease.
Hire from
£46.20 £61.60 £38.50 ex.VAT
Requested hire period: 3 daysAverage hire period: 3 days
Product name: Floor Sander 240V
Product code: 05412
If you are looking to give old wood floorboards, block wooden floors or traditional parquet a new lease of life then take a look at our heavy-duty Floor Sander to help get the job done with ease. The drum floor sander removes old finishes and most decorative stains, and levels imperfections ready for polishing or varnishing. Whilst the heavy-duty high-speed motor prevents the floor sander from stalling or slowing down when using coarse grit floor sheets.
In order to sand right up to the skirting board we recommend you hire the Floor Edging Sander alongside the Floor Sander. The edging sander allows you to tackle tricky to reach edges, making the job a lot quicker and easier than doing it by hand, and will leave you with a professional finish. See our Hire Pack to make a saving.
Read the HSS Guide to Floor Sanding for some great hints and tips and watch the video below.
Note: Must only be used with a disposable dust bag (available to add to your order at checkout) - an efficient and convenient way of collecting dust. Remember to exercise caution when working around dust and always use recommended PPE - View our dedicated Health & Safety article on our blog now!
- Easily sands board, block and traditional parquet wooden floors
- Efficient 200mm (8in) wide sanding drum
- High-powered vacuum system
- High impact resistant guards
- Tough clamp bar style drum
- Breaks down into three components making it easier to transport
- Sanding sheets and dust bags not included and sold separately at checkout
- Recommended for use with Floor Edging Sander (see our Hire Pack - 05429)
- Brand: Hiretech
- Height: 0.855m
- Voltage: 240V
- Watts: 1920W
- Weight: 42kg
- Width: 0.322m
You must wear all round protection grade 1 goggles to EN 166.B - for less hazardous work grade 2 spectacles can be worn.
Protection required against high noise levels. Earplugs are suitable for short-term work.
Medium vibration risk - for tools that may be used for up to 2 hours before reaching vibration Exposure Limit Value (ELV)
You will need a vehicle at least the size of an estate car to collect this item.
We recommend using a Dust Extractor where you see this symbol
Residual Current Devices protect form electric shock. Strongly recommended for electrical equipment used outdoors or in damp conditions.
General purpose, disposable masks for protection against low-risk dust and water-based airborne sprays.
Watch our experts to see how it works
Questions
No, safety equipment is not supplied with the item.
Yes, we include a heavy duty RCD breaker for use with the Floor Sander.
The difference between grit sheets is the finish and effect they have on materials. The higher the number, the finer the grit sheet is whereas the coarseness increases as the grit sheet number lowers. For example, you may need to begin with coarser sandpaper for wood to remove tough varnishes and level your floor before coming down to a fine paper that ensures a smooth finish.
No, this sander can't be used on the edges of your room but the floor edging sander can. The floor edging sander is designed for getting close to skirting boards & edges easier than a standard sander. Using both tools for your flooring project will give you a clean, professional finish.
You can hire both the floor & edging sander together as a hire pack.
The sander is a 240V tool that can be plugged into the mains. An RCD plug is recommended for optimum safety but not mandatory.
The extension cable is 5 metres long.
This sander is a Hiretech HT8 model.
A drum floor sander is used to strip finishes, stains, and top layers from wood floors and to smooth out uneven surfaces before refinishing or sealing.
Yes - the sander breaks down into three components, making it easier to load into a vehicle and carry to your project location. You’ll need a vehicle at least the size of an estate car for collection.
This floor sander is suitable for wood floorboards, block wooden floors, and traditional parquet.
The sander must be used with a disposable dust bag, which provides an efficient way to collect dust. A dust extractor is also recommended for optimal cleanliness and safety.
Yes, the sander can damage pipework or fittings so care must be taken around visible pipework, as the coarse sanding sheets may damage unprotected surfaces.
Due to its medium vibration risk, it can be used for up to 2 hours before reaching the vibration Exposure Limit Value (ELV). Take regular breaks and follow recommended usage limits.
Remove all furniture, nails, staples, and tacks from the floor. Ensure the surface is dry and secure any loose floorboards before beginning.
Related products
Related posts
Hire from
£46.20 £61.60
